One Year Replacement Warranty On All Products!
Included
Cognex In-Sight 5400 CCD Vision Sensor 800-5855-1B
IS5400-10 Revision A
With Fujinon HF50HA-1B 1:2.3/50mm Lens
Specifications:
| Minimum Firmware Requirements | In-Sight version 2.80.01 PR1 |
| Memory |
Job/Program: 32MB non-volatile flash memory; |
| Sensor | 1/3-inch CCD |
| Sensor Properties | 5.92mm diagonal, 7.4 x 7.4µm sq. pixels |
| Resolution (pixels) | 640 x 480 |
| Electronic Shutter Speed | 16µs to 1000ms |
| Acquisition | Rapid reset, progressive scan, full-frame integration 256 grey levels (8 bits/pixel) 60 full frames per second |
| Lens Type | C-mount |
| CCD Alignment Variability | ±0.127mm (0.005in), (both x and y) from lens C-mount axis to center of imager |
| Trigger | 1 opto-isolated, acquisition trigger input. Remote software commands via Ethernet and RS-232C |
| Discrete Outputs | 2 built-in, high-speed outputs. Additional outputs available using a compatible I/O module. Unlimited outputs when using an Ethernet I/O system. |
| Status LEDs | Power, Network Status, Network Traffic, 2 user configurable. |
| Network | 1 Ethernet port, 10/100 BaseT, TCP/IP protocol. Supports DHCP (factory default) or static IP address. |
| Serial | RS-232C when connected to an optional I/O module. |
| Power | 24VDC ±10%, 350mA maximum. |
Details
| AP189 |
| IS5400-10 / 800-5855-1B |
| No |
